Markdown Peterson Brass 6×47 Lapua Unprimed Box of 50

All 50 count listings of Peterson Cartridge casings come in one of their plastic ammo boxes. Made in the U.S.A. Match-Grade is a standard that must be held throughout the entire process of manufacturing some of the most consistent, accurate, and durable brass rifle casings available today. From Peterson’s small batch production lines to their quality control department, to your bench, and on to the range. Match-grade is the standard that Peterson strives to achieve so that customers can maintain that standard all the way to the target. Most competitive shooters know and respect the caliber 6.5×47 Lapua. But there is another community that really likes the necked down 6×47 Lapua. Most 6×47 shooters dread the tedium of having to neck the 6.5 casings down. Problem solvedPeterson Cartridge now offers factory made 6×47 Lapua. Many shooters like the 6×47 Lapua because it produces faster velocities. Also the recoil is even less than the relatively low recoil 6.5. Some shooters like the 6×47 because they find that 6mm bullets outperform the 6.5 projectiles. So Peterson Cartridge has released factory-made, properly headstamped 6×47 Lapua casings. Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for fire forming or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturers recommendations. NOTE: All Peterson SRP casings feature a small flash hole in the diameter of 0.060 vs. the 0.080 flash hole found in their LRP casings. This means you will need an X-small/ Undersized Decapping Pin to deprime these casings. This is not loaded ammunition.